MERCHANT AUTOMOTIVE VALVE ADJUSTMENT

Making Your Motorcycle Valve Adjustment

Most motorcycle owners are familiar with basic maintenance and repair, but some may not think about valve adjustment as part of their regular routine. However, adjusting your motorcycle’s valves is an important step in keeping your bike running smoothly. The process can seem daunting, but with a few extra tools and a little patience, you can get your motorcycle valves adjusted in no time. In this article, we’ll cover the steps for accomplishing this task and give you few helpful hints for keeping your valves in top shape.

Tools and Supplies Needed for Valve Adjustment

Before we get into the actual process of adjusting your motorcycle’s valve, it’s important to be sure you have the right supplies. You will need an adjustable wrench, a feeler gauge, a pair of locking pliers, and a torque wrench. You may also need a can of special valve adjustment compound, depending on the make and model of your motorcycle. It is important to be familiar with each tool and the job it will be performing before you begin the valve adjustment process.

The Step-by-Step Process of Adjusting Your Motorcycle Valves

Now it’s time to get to work. Take the following steps to adjust your motorcycle’s valves:

1. Identify the valve covers on your motorcycle. These are usually located on top of the engine and are made of metal. Unscrew these covers and remove them after you have drained any excess oil.
2. Inspect the valve springs and make sure there are no signs of damage or wear. If all is clear, turn your wrench to loosen the nuts and the valves. Be sure the valves are not in contact with each other.
3. Once the valves are loose, use the feeler gauge to measure the gap between the valve stems and the valve seat. Put the feeler gauge in each gap and adjust the valves using the adjustable wrench until the gap is exactly the width of the feeler gauge.
4. Apply a light coating of your chosen valve adjustment compound to the valve stems for lubrication. This will help keep the valve stems from becoming too tightly fastened.
5. Tighten the valves with the adjustable wrench and a torque wrench. Be sure to use the correct amount of torque to ensure the valves are seated and functioning properly.
6. Reattach the valve covers and make sure they are securely fastened. Replace the oil and any other items removed during the adjustment process.

Frequently Asked Questions

Still have questions about adjusting your motorcycle’s valves? Here are a few of the most commonly asked questions to help you out:

• Do I need any special equipment to adjust my motorcycle’s valves? Yes, you will need an adjustable wrench, feeler gauge, and torque wrench. You may also require a can of valve adjustment compound depending on your bike’s make and model.
• How often do I need to adjust my motorcycle’s valves? The answer to this question varies depending on your motorcycle’s age and type. In general, it’s recommended to adjust valves every 6,000 to 10,000 miles. For more guidance, please refer to your bike’s manual.

Adjusting your motorcycle’s valves is a simple process that can be performed in a matter of minutes. By following the steps outlined above, you can ensure that your bike’s valves are running at peak performance and keep it running strong for years to come.

If you are searching about Adjustment: Valve Lash Adjustment you’ve came to the right place. We have 5 Pics about Adjustment: Valve Lash Adjustment like Adjustment: Valve Lash Adjustment and also Valve Adjustment and other findings. Help appreciated. – Page 2. Here you go: